2L / 3L Household Small Mosquito Killing Insecticide Spraying Machine Disinfection Anti-epidemic Sprayer Thermal Fog Machine Mist Sprayer Electronic Atomizers For Forestry Agriculture – 2L

2L / 3L household small mosquito killing insecticide spraying machine disinfection anti-epidemic sprayer thermal fog machine mist sprayer

 

Feature:

1. The droplet diameter is small, the penetration force is strong, the diffusion is fast, and the ultra-low volume spray can be performed on the chemical agent with higher viscosity;

2. High horsepower, fast aerosol, high efficiency;

3. Flow adjustment knob can continuously adjust the spray volume and control the droplet diameter;

4. The range of action of high-pressure dense fog is very wide: the fog nozzle is slender, the fog volume is large, the area is large, and the fog droplets are uniform.

5. Leakage protection device: equipped with a leakage protection device, safe and reliable ..

6. Large-caliber feeding: large-caliber, convenient feeding, save time, equipped with filter screen, eliminating the funnel.

7. Applicable scenarios: Scope of application: disinfection of gardens, flowers and trees, disinfection of syringes in schools and hospitals, etc.

Product Specifications:

l Type: Sprayer

l Size: 490 * 170 * 350 (mm)

l Net weight: 1.5 (kg)

l Fuel: Butane (220g gas tank)

l  additives: aerosol or 0 # diesel

l Fuel tank capacity: 2L / 3L

l Particle diameter: 5-30PM

l Start mode: ceramic igniter

l Gas tank time: 2 hours

l Applicable objects: tea trees, vegetables, lawns, fruit trees, roadside hedges

l Application areas: forestry, agriculture

Filler

1 * fog machine

Instructions:

1. Pour 2 liters of diesel oil and 30-50 ml of medicament in the liquid tank, and mix it.

2. Fill the cooling water tank with water and install the liquid gas tank on the fog machine.

3. Turn the control switch to the cooling position, and then operate the cooling water pump to confirm that the heating ring is not blocked.

4. After opening the gas control lever and pressing the ignition switch, check the gas combustion. Turn the  cooling control switch to the  function position, and then continue to squeeze and release the  pump operating lever by hand, so that the  machine is started. (Note: In the ignition state, if the  pump operating lever is not operated, the coil will be blocked)

5. After spraying the , turn the cooling control switch to the cooling function position, and immediately turn off the gas control lever. When the heating power is still hot, operate the cooling water pump to clean the coil, which can prevent the coil from clogging and ensure its long-term use.