- Description
- Reviews (0)
Description
Product details of Baku BK-858A Hot Air Soldering Station Multifunction SMD/SMT Rework station with LED Indicator Light Replace 858D 878D+
- প্রথমত Baku BK-858A ই সরবরাহ করা হবে তবে মার্কেটে স্টক Available না থাকলে Active Power 858A Koocu 858 Kada 858 সরবরাহ করা হতে পারে সেক্ষেত্রে Power Comsumption, Blower Fan Type, Wind Speed, Weight, Color, Temperraure রেঞ্জ সেম থাকবে
- Baku BK-858A হলো Hot Air Rework Station এটাতে হিট গান ও Air Flow ভলিউম দিয়ে তাপমাত্রা বাড়াতে কমাতে পারবেন।
- যখন আর্দ্রতার কারনে মোবাইল, টিভি, টেলিকমিউনিকেশন বা যেকোন ইলেকট্রনিকস ডিভাইসের মাদারবোর্ডের component গুলো কাজে অনুপযোগি বা ব্যাঘাত ঘটায় তখন এই হিট গান দিয়ে ময়েশ্চার রিমোভ করতে পারবেন।
- যেকোন ইলেকট্রনিক্স ডিভাইস/ মোবাইলে পানি গেলে এই Heat Gun দিয়ে পানি শুকাতে পারবেন।
- এই হিট গান দিয়ে টাচ স্কিন/ ডিসপ্লে খুলতে পারবেন।
- যেকোন DIP/ SMT Component যেমন SMD IC Transistor Resistor Capacitor Replace করতে পারবেন.
- Baku BK-858A /Active Power 858A Koocu 858 Kada 858 Hot air Soldering station Multifunction SMD/SMT rework station
- Category: LED microcomputer digital display
- Power consumption: 700W
- Airflow type: brushless fan gentle wind
- Gas flow rate: 120 L / min ( maximum )
- Temperature regulating range: 100 degrees 500 degrees C C
- The handle assembly length: 120cm
- Machine size: 150 * 100 * 130MM
- Machine weight: 1.8kg
- Noise : less than 45db
858 BK-858A SMD Rework Station Features:
1.The products adopt closed loop of transducer.Mcu intelligent drive.Digital LED indicator display.High-power.The temperature turn uo is very fast.Temperature stabilization and is impervious to air.Use the brushless fan,and long life and low noise.It is good for lead free work too.
2.The air flow can be adjustable and air blowing is big and gentle blowing plastic components won’t be deformed.Such as buzzer and external interface of mobile phone.
3.It is inductance in the handle.It will be quickly to work when you take the handle,when the handle is return to the shelf,the machine will automatic stop age.
4.Automatic to blow cool air to safe the heating.Temperature rapidly rises,and it can reach to the setting temperature only within 3 or 5 seconds.Small volume light weigh,temp-control accurately.
5.Safely remove BGA-IC,keep pins intact.Much more safe and reliable.
6. Blowing PCB will not make it blister.
7. Brushless fan rework station. – Suitable for unsoldering multipe component,such as SOIC,CHIP,PLCC and BGA,etc(especially for flat cables and cable connectors).
8.Applicable for hot contraction,heating,depainting,degluing,defrosting,preheating and soldering.
4.Each part can be used alone.
Only logged in customers who have purchased this product may leave a review.
Reviews
There are no reviews yet.